Nauticomp 21-1210 Marine 12.1” Daylight Glass Bridge Display FOR PARTS OR REPAIR
Nauticomp 21-1210 Marine 12.1” Daylight Glass Bridge Display FOR PARTS OR REPAIR
Nauticomp 21-1210 Marine 12.1” Daylight Glass Bridge Display FOR PARTS OR REPAIR
Nauticomp 21-1210 Marine 12.1” Daylight Glass Bridge Display FOR PARTS OR REPAIR
Nauticomp 21-1210 Marine 12.1” Daylight Glass Bridge Display FOR PARTS OR REPAIR
Nauticomp 21-1210 Marine 12.1” Daylight Glass Bridge Display FOR PARTS OR REPAIR

Nauticomp 21-1210 Marine 12.1” Daylight Glass Bridge Display FOR PARTS OR REPAIR

  • Sale
  • $99.95
  • 1 available
  • Nauticomp 21-1210 Marine Radar GPS Chartplotter Fishfinder 12.1” Sunlight Glass Bridge Display FOR PARTS OR REPAIR
  • Marine Radar GPS Chartplotter Fishfinder 12" Sunlight Glass Bridge Display 
  • NautiComp Marine Displays set new standards for performance.
  • They're built tough for the marine environment by a factory that stands behind its products with extensive testing.
  • They're easy to use, with clear, simple set up and control.
  • Display Characteristics:
    • Type: 12.1 Active Matrix TFT
    • Dot Number: 1024 x 768 Pixels
    • Dot Pitch: 0.240mm
    • Response Time: 23ms Average- Typical
    • Contrast Ratio: 700:1 Min.
    • Brightness / Light Intensity: Enhanced to 750cd/m² (Nits)- Typical
    • Viewing Angles (at CR>10): 80o Left/Right, 80o Up & 80o Down
    • Backlight Life: 50,000 Hours- Typical
    • Color Depth: 16.7 Million (Depending on Graphics Card)
  • Dimming Circuit:
    • Range: Full on to 0.5 cd/m² (Nits)- Approx. w/Red
    • DVI-I Input:  
      • Analog Interface: 30 MHz Max. Analog Bandwidth, 0.5V to 1.0V Analog Input Range, Sync-on-Green (-ve) 0.3V
      • Digital Interface: DVI 1.0 Compatible Interface, 108 MHz Operation
  • Synchronization Range:
    • Horizontal Scan: 31 - 80 kHz
    • Vertical Scan: 56 - 85 Hz
  • Resolutions:
    • VESA Support for:
      • 1280 X 1024 SXGA
      • 1024 x 768 XGA
      • 800 x 600 SVGA
      • 640 x 480 VGA
  • Active Display Area: 246.06 mm x 184.94 mm
  • Composite Video Input: PAL, NTSC & SECAM with Picture In Picture PIP Facility
  • Input Voltage: 12.1V DC Regulated
  • Maximum Power Consumption: 1.25 A (15W)
  • Environmental:
    • Operating Temperature: -4 to +158°F / -20 to +70°C
    • Storage Temperature: -13 to +167°F / -25 to +75°C
    • Operating Humidity: 30% to 90% (Non-Condensing)
    • Storage Humidity: 10% to 90% (Non-Condensing)
    • Shock: 10g, 11msec ½ Sine Wave
    • Vibration: +/-1mm, 2 to 13Hz: 0.7g 13 to 100 Hz
  • Construction:
    • Finish: Black Fine Textured Semi Gloss Powder Coat
    • Housing: Preformed Aluminium
    • Sealing: Waterproof NEMA 6 / IP67
    • Toughened Safety Glass: Bonded, Contrast Enhancing, Optically Coated and Polarized
    • Ventilation: Convection
  • Mounting Style: Console/Flush Mount
  • Panel Cut-Out Size: 11-19/64” (286.94mm) X 8-57/64” (225.82mm)
  • Dimensions: 11-5/8" (295.28mm) W X 9-3/16” (233.36mm) H X 3-15/16” (100.01mm) D
  • Input Connectors:
    • 2x RGB Signal: DVI-I Female (Via 15-pin Converter)
    • 2x DVI Signal: DVI-I Female (Combined with RGB)
    • 3x Composite Signal: 7-pin Male Circular
    • 1x Component Signal: 7-pin Male Circular
    • 2x S-Video Signal: S-Video Socket
    • USB Connection: USB Type B Male (Proprietary Network)
    • GB Commander: 10-pin Male Circular
    • Power: 2-pin Male Circular
  • Menu Controls:
    • Via Remote GB Commander: OSD Picture Features Size, Position, Colour & PIP
  • Compliance: CE: IEC60945 / CISPR22 / EN 55022, FCC: Part 15 Section 15.109
  • Manufacturer: Nauticomp
  • Model Number: Glass Bridge Display 
  • Part Number: 21-1210
  • Condition: In Stock and Ready to Ship! This unit is in good physical condition and was removed from a boat that received a total electronics refit. Powers on but screen is dim. Backlight may be out. See Photos. This unit is being SOLD AS-IS. This listing is only for what is shown in the photos. No other parts or pieces are included.