Newmar 24-12-12i Fully Isolated 12 AMP 24 VDC To 12 VDC DC Converter Stabilizer

  • Sale
  • Regular price $229.95
  • 1 available


  • Fully Isolated 24 VDC 12 AMP To 12 VDC DC Converter Stabilizer
  • The Isolated series provides voltage conversion as well as input/output isolation, allowing use of negative ground gear to positive or floating ground battery systems, or vice versa. 
  • May also be used as 12 or 24 volt stabilizers for highly input voltage sensitive equipment.
  • Using an Isolated Converter as a voltage stabilizer on 12 or 24 volt systems can solve conducted noise and interference problems on sensitive DC powered devices communication, navigation systems, and DC micro-processor based devices.
  • Precise output voltage regulation
  • Reverse polarity
  • Input fuse/Output fuse
  • Total input/output isolation, pos. or neg. ground
  • Current limiting, short circuit proof output
  • Automatic re-setting thermal shutdown
  • High/low input voltage shutdown
  • Polyurethane conformal coating on PC board
  • Power ON light
  • Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC 
  • Ripple: 150 mV P-P maximum
  • Regulation: 1% Line/Load
  • Duty Cycle Ratings: Intermittent – 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating. Continuous – 24 hours, 100% duty
  • Idle Current: Less than 100 mA (including power “ON” light )
  • Operating Temp: 0-50˚ C, Derate Linearly From 100% @ 40˚ C To 50% @ 50˚ C.
  • Thermal shutdown @ 70˚ C Case Temperature.
  • Switching Frequency: 40 Khz.
  • Efficiency: 85% – Typical.
  • Isolation – Output/Chassis; Input/chassis: 250 VDC
  • Manufacturer: Newmar 
  • Model Number: 24-12-12i, (12-12-12i) 
  • Condition: In Stock, Ready to Ship! This unit is in very good physical condition and was removed from a boat that received a total electronics refit. Will require fuse retainers. See Photos. This unit is being SOLD AS-IS. This listing is only for what is shown in the photos. No other parts or pieces are included.